How to Rescue Your Electronic Earmuffs Shooting in Kansas After They Get Wet

“Oh no! My ear muffs fell in the water!”

This is what people shout when this essential shooting gear falls victim to unexpected water exposure. Electronic earmuffs for shooting in Kansas are sensitive electronic items that can get damaged due to water. But do you have to buy a new pair of earmuffs now? Maybe or maybe not.

Before rushing to buy a replacement, try rescuing the old one first. If it works, you can thank us later!

How to Save Your Electronic Shooting Earmuffs in Kansas After Water Exposure

1.   Act Fast and Turn Them Off

If you discover your electronic earmuffs have been exposed to water, the first step is to turn them off immediately. The longer your earmuffs stay on while wet, the greater the risk of short circuits and potentially irreversible damage to the internal components. Also, remove the batteries immediately, as leaving them in can lead to corrosion and, over time, reduce your earmuffs’ performance.

2.   Remove Moisture as Quickly as Possible

After that, use a soft, absorbent cloth or paper towels to gently dab any visible water on the earmuffs. Avoid vigorous rubbing, as this can push water deeper into the components and potentially damage the sensitive parts of the earmuffs. Concentrate on the ear cups and battery compartments, as these are often the most vulnerable areas.

3.   Use Desiccants to Absorb Remaining Moisture

Once you’ve dried the exterior, it’s time to address any moisture trapped inside. Place the ear muffs in a plastic bag with a few desiccant packets. If you don’t have silica gel packets, uncooked rice can work as a substitute, though it’s not as effective as desiccants. Leave your electronic earmuffs for shooting in Kansas in the plastic bag for at least 24-48 hours to give the drying agent time to pull out as much moisture as possible.

Avoid Using Heat to Dry Them Out

Don’t do anything to speed up the drying process with a hairdryer or leave your earmuffs in direct sunlight. It can damage the sensitive electronic components and even warp or crack the plastic housing.

4.   Clean Any Corrosion in the Battery Compartment

Water exposure can lead to corrosion, especially in the battery compartment. After 24-48 hours, check the battery compartment for any white, powdery residue, which is a sign of corrosion. If you spot any, use a cotton swab dipped in a small amount of white vinegar or isopropyl alcohol to gently clean the area.

5.   Reassemble and Test Your Earmuffs

Lastly, put in fresh batteries, turn the earmuffs on, and check if they function normally. Test all features, including the volume controls and sound amplification, to ensure they’re working as expected. If you encounter any issues, it’s best to consult a professional repair service to avoid further damage.

Wrap Up

Water exposure can be detrimental to electronic earmuffs for shooting in Kansas, but quick action can prevent lasting damage. By following the steps like turning them off, drying them, putting desiccant with them, and cleaning the battery compartment, you can rescue your earmuffs.

Proper care and protection will help ensure that your earmuffs continue to perform well. If not so, then don’t worry! You can get an affordable and robust one from Helmers Hunting Products!